D-Link DAS-3216_revB Software Guide
44
錯誤! 尚未定義樣式。
Configuring the GVRP Port Info
This field configures the GVRP attributes per bridge port interface.
Table 8-2
Configuring the GVRP Port Info
Use this command to modify the GVRP port info parameters.
#modify gvrp port info portid <portid> [portvlanid portvlanid] [acceptframetypes all | tagged] [ingressfiltering
true | false] [gvrpstatus enable | disable] [restrictedvlanreg true | false]
true | false] [gvrpstatus enable | disable] [restrictedvlanreg true | false]
Use this command to monitoring the GVRP port info settings.
#get gvrp port info [portid portid]
Parameters
Task
portid <portid>
The bridge port id.
Valid values: 1 ~ 386
[portvlanid portvlanid]
The VLAN Identifier
Type: Optional
Valid values: 1 ~ 386 (portid)
Default values: none
[acceptframetypes all | tagged]
When this is ‘tagged’, the device will discard un-tagged frames or priority-tagged frames received on
this port. When this is ‘all’, untagged frames or priority-tagged frames received on this port will be
accepted and assigned to the PVID for this port.
this port. When this is ‘all’, untagged frames or priority-tagged frames received on this port will be
accepted and assigned to the PVID for this port.
Type: Optional
Default values: all
[ingressfiltering true | false]
When this is true, the device will discard incoming frames for VLANs, which do not include this
Port in its Member set. When false, the port will accept all incoming frames.
Port in its Member set. When false, the port will accept all incoming frames.
Type: Optional
Default values: true
[gvrpstatus enable | disable]
The state of GVRP operation on this port.
Type: Optional
Default values: enable
[restrictedvlanreg true | false]
The state of restricted VLAN registration on this port. If the value of this control is ‘true’, then
creation of a new dynamic VLAN registration entry for the VLAN concerned, in which the registrar
administrative control value for this port is normal registration.
creation of a new dynamic VLAN registration entry for the VLAN concerned, in which the registrar
administrative control value for this port is normal registration.
Type: Optional
Default values: false
DAS3series IP-DSLAM
System Configuration Guide