D-Link DAS-3216_revB Software Guide
58
錯誤! 尚未定義樣式。
IP Ping Testing
Use ‘ping’ command to diagnosis basic network connectivity on IP address or domain name.
Table 11-2
IP Ping Testing
#ping {ip-address | domain-name} [-t | -n number] [-i time-to-live] [-w seconds] [-s size]
Parameters
Task
{ip-address | domain-name}
This specifies the destination address to be pinged.
Type: Mandatory
Valid values: Any valid IP address (0.0.0.0 ~ 255.255.255.255) or domain name (String of max. 63
characters)
characters)
[-t | -n number]
This indicates continuous ping to host or specifies the number of pings to send to host.
Type: Optional
Valid values: 0 ~ 255 (-n)
Default Value: 4
[-i time-to-live]
This specifies the time-to-live, to be filled in the ping request.
Type: Optional
Valid values: 0 ~ 255
Default Value: 64
[-w seconds]
This specifies the time interval between successive ping requests.
Type: Optional
Valid values: 0 ~ 255
Default Value: 2
[-s size]
This specifies the size of payload for ping.
Type: Optional
Valid values: 4 ~ 1500
Default Value: 64
Appendix
Abbreviations and Acronyms
The abbreviations and acronyms used in this document.
Table 0-1
Abbreviations and Acronyms Table
Abbreviations Full
Name
AAL ATM
Adaptation
Layer
ADSL
Asymmetric Digital Subscriber line
AIS
Alarm Indication Signal
ATM Asynchronous
Transfer
Mode
ATU-C
ADSL Transceiver Unit at the central office end
ATU-R
ADSL Transceiver Unit at the remote end
CBR
Constant Bit Rate
CV Coding
Violation
DSLAM
Digital Subscriber line Access Multiplexer
ES Error
Seconds
EOA Ethernet
over
ATM
DAS3series IP-DSLAM
System Configuration Guide