D-Link DAS-3248 Data Sheet

Page of 2
48-Port IP DSLAM
DAS-3248
ADSL
The D-Link DAS-3248 is a 48-port IP-based DSL Access Multiplexer that provides ADSL access to CPE (consumer premise 
equipment) ADSL modems/routers at the subscribers
side. This DSLAM connects to the network service provider's network 
through its Ethernet interface. Using the latest ADSL/ADSL2/ADSL2+ technology, this IP DSLAM provides carriers a very 
cost-effective solution to offer their subscribers with features such as bandwidth management, traffic prioritization and data 
flow security control.
Designed for Multi-Unit, Multi-Tenant Buildings
48 ADSL Ports With Built-in Splitters
VLAN Support for Enhanced Security
The D-Link DAS-3248 IP DSLAM delivers the next 
generation of high-performance business and residential 
DSL services. With the DAS-3248, carriers can offer digital 
video, high bandwidth Internet access.
The DAS-3248 IP DSLAM provides 48 ADSL port 
connections, plus built-in ADSL/POTS splitter per port (16 
ADSL ports via 2 RJ-21 (Telco-50) connectors, plus 16 
splitter ports through 2 other RJ-21 (Telco-50) connectors). 
A 10/100BASE-TX Ethernet uplink connects the DAS-3216 
to the carrier's network.
The DAS-3248 IP-DSLAM supports 802.1Q Tagged VLAN 
to provide complete subscriber isolation and enhance the 
ADSL network performance.
Versatile Management
Complete ADSL Solution
Up to 8 DAS-3248 can be cascaded and managed as one 
single unit. With the local RS-232 and Ethernet management 
port, plus inband SNMP/TELNET channel, the DAS-3248 
provides local and remote management capabilities using a 
Command Line Interface (CLI), SNMP and Telnet. In 
addition, a Microsoft NT/SNMP based GUI EMS system 
provides service providers with low-cost, high-value central 
management capability of the DAS-3248.
With the DAS-3248 IP-DSLAM, D-Link provides service 
providers with a complete ADSL service solution. This IP 
DSLAM integrates and operates seamlessly with D-Link's 
extensive range of ADSL modems and routers Customer 
Premise Equipment (CPE).
Advanced Functions for Broadband Service Offering
IGMP snooping
Security functions: VLAN filtering, MAC filtering, IP filtering, 
Up to 8 VCs, 128 MAC addresses per DSL port
MAC-based and IP-based Access Control List (ACL)
Up to 64 x 128 MAC addresses, 2K Multicast MAC addresses 
802.1d Spanning Tree for redundant backup bridge paths
per DAS-3248 device
802.1p traffic prioritization for QoS
Up to 512 VLANs (any value in 4096)
MAC-based and IP-based rate limiting
Static VLAN and port-based VLAN support
802.3ad link aggregation
Configurable packet size (64 to 1536 bytes)
BRAS, 802.1x, DHCP server/relay, PPPoE, MPLS, VLAN-based 
VPN, L3 router, L2TP *
* Functions available in future firmware upgrade.
Product Function & Features
Cost Saving Solution for Service Providers
     
48 ADSL/ADSL2/ADSL2+ subscriber interface ports
     10/100/1000BASE-T and fiber Gigabit uplinks to carriers' 
      backbones
Flexible and Secure Configuration/Management
     
Microsoft NT/SNMP-based GUI EMS
     Local RS-232 out-of-band CLI and remote in-band 
     SNMP/TELNET management
Built in POTS splitter per port
Easy expansion: low-profile rack-mount boxes can be cascaded 
to maximum 8 units and managed as one single entity
     3-levels of user privilege system management
     SNMP v1, v2c, v3 support
     Firmware upload/download via FTP or TFTP