D-Link DAS-3224_revB User Manual
66
DAS3 Series Operation Menus
4.8.4 Filter
Wizard
Filter Wizard can guide administrator to set up rules and sub rule for the filter.
Figure 4-55
Filter Wizard Dialog
Table 4-29
Filter Wizard Add Rule Dialog Description
Item
Description
Rule ID
Unique identifier of a filter rule.
Valid values: 2 ~ 300, 1 reserved for IGMP Snooping
Valid values: 2 ~ 300, 1 reserved for IGMP Snooping
Rule Description
Description of the application that receives packets matching this rule.
Valid values: 1 ~ 100 characters
Valid values: 1 ~ 100 characters
Action to be applied for the packets matching this filter rule.
Possible choice: [ drop | allow | set priority | send to control | retag priority |
copy to control | go to next rule | forward exit ]
Possible choice: [ drop | allow | set priority | send to control | retag priority |
copy to control | go to next rule | forward exit ]
Rule Action
Priority Only
Applicable
when
setting priority is involved.
Rule Statistics Status
Enable or disable this rule.
Specifies whether the rule will be applied on incoming interfaces (ingress) or
outgoing interfaces (egress).
Specifies whether the rule will be applied on incoming interfaces (ingress) or
outgoing interfaces (egress).
Rule Direction
Packet Type
Only Applicable when Rule Direction is Out
Next Click
‘Next’ to advance to ‘Add Rule’ step
AMS
Software Specification and Introduction Guide