D-Link DAS-3224 User Manual
D-Link DAS-3248 IP DSLAM
101
interface.
Command Syntax: modify eoa intf ifname interface-name [pkttype
{multicast|broadcast |unknown-unicast}+ | all| none]
[fcs false |true][enable|disable]
[fcs false |true][enable|disable]
Parameters
Name
Description
ifname interface-name
This parameter specifies the name assigned to this interface.
Type : Create – Mandatory
Type : Create – Mandatory
Delete – Mandatory
Get – Optional
Modify – Mandatory
Get – Optional
Modify – Mandatory
Valid values: eoa-0,eoa-1….
lowif
low-interface-name
low-interface-name
This parameter specifies the lower interface of an EoA
interface.
Type : Mandatory
Valid Values : aal5-0 - *
interface.
Type : Mandatory
Valid Values : aal5-0 - *
pkttype
{multicast|broadcast
|unknownunicast}+|
all|none
{multicast|broadcast
|unknownunicast}+|
all|none
This defines the packet type supported by the interface.
EoAPktTypeSupported shall be configured for every CPE-side
Ethernet interface. By default, the option taken is 'ALL' and it
means that all packets will be transmitted. The value 'None'
means that normal UCast packets will be transmitted. The
interface shall not transmit any other packet type than
configured.
Type: Optional.
Valid Values : {multicast |broadcast |unknown-unicast}+| all
Default Value : all.
EoAPktTypeSupported shall be configured for every CPE-side
Ethernet interface. By default, the option taken is 'ALL' and it
means that all packets will be transmitted. The value 'None'
means that normal UCast packets will be transmitted. The
interface shall not transmit any other packet type than
configured.
Type: Optional.
Valid Values : {multicast |broadcast |unknown-unicast}+| all
Default Value : all.
fcs false | true
This specifies whether Ethernet FCS needs to be computed.
Currently only false is supported.
Type : Optional
Valid Values : false or true
Default Value: false.
Currently only false is supported.
Type : Optional
Valid Values : false or true
Default Value: false.
Enable|disable
Administrative status of the interface
Type : Optional
Valid values : enable or disable
Default Values: enable
Type : Optional
Valid values : enable or disable
Default Values: enable
Example $create eoa intf ifname eoa-0 lowif aal5-0 enable fcs false
Output Verbose Mode On
Entry Created
IfName : eoa-0 LowIfName : aal5-0
FCS : False
Pkt Type : ALL
Oper Status : Down Admin Status :
Up
FCS : False
Pkt Type : ALL
Oper Status : Down Admin Status :
Up
Output Fields
Name
Description
IfName
The name of the interface that has been created.
LowIfName
Specifies the lower interface.
FCS
Whether FCS is true or false.
Pkt Type
This defines the packet type supported by the inter-
face. EoAPktTypeSupported shall be configured for
every CPE-side Ethernet interface. By default, the
option taken is 'ALL' and it means that all packets
will be transmitted. The value 'None' means that
normal UCast packets will be transmitted. The
interface shall not transmit any other packet type
face. EoAPktTypeSupported shall be configured for
every CPE-side Ethernet interface. By default, the
option taken is 'ALL' and it means that all packets
will be transmitted. The value 'None' means that
normal UCast packets will be transmitted. The
interface shall not transmit any other packet type