D-Link DAS-3224 User Manual

Page of 202
 
D-Link DAS-3248 IP DSLAM 
116
 
  delete bridge static mcast   
Description: Use this command is used to delete. 
Command Syntax: delete bridge static mcast [vlanid vlanid] mcastaddr 
mcastaddr 
   
  get bridge static mcast   
Description: Use this command is used to get.   
Command Syntax: get bridge static mcast [ vlanid vlanid ] [ mcastaddr 
mcastaddr ] 
  modify bridge static mcast   
Description: Use this command is used to modify 
Command Syntax: modify bridge static mcast [vlanid vlanid] mcastaddr 
mcastaddr [ egressports egressports ] 
[ forbidegressports forbidegressports ]
 
 
Parameter 
Name   
Description   
Vlanid vlanid   
The VLAN id for this VLAN. In devices supporting 
"Shared Vlan for multicast" capability, the information 
for a multicast MAC address is shared across vlans. 
Hence vlan id is an optional parameter. In de-vices 
supporting "Independent Vlan for multicast" capability, 
each vlan can have its own information for a multicast 
MAC address. Hence vlanid is a mandatory parameter 
in all the commands other than - get. For No Vlan case, 
vlan id is not required.   
Type              :Optional for all commands   
Valid values: 0 - GS_CFG_MAX_VLAN_ID 
Default value:   
mcastaddr 
mcastaddr  
 
The destination multicast MAC address in a frame, to 
which this entry's filtering information applies. Bit 0 of 
the first octet of the MAC address indicates a group 
(multicast) MAC address, if the bit is SET. For example, 
01:00:00:00:00:00,03:FF:FF:FF:FF. Addresses in the 
range 01:80:C2:00:00:00 - 01:80:C2:00:00:0f and 
01:80:C2:00:00:20 - 01:80:C2:00:00:2f have been 
blocked as value of this index, as these are reserved 
GARP addresses.   
Type                : Create -- Mandatory   
Modify --Mandatory   
Delete -- Mandatory   
Get - Optional   
Default value:   
egressports 
egressports|none  
 
The set of ports, to which frames received from a 
specific port and destined for a specific Multicast MAC 
address must be forwarded. A port may not be added in 
this set, if it is already a member of the set of ports in 
ForbidEgressPorts. More than one val-ue can be 
given, separated by spaces.   
Type              :Optional for all commands   
Valid values: 1 – GS_CFG_MAX_BRIDGE_PORTS   
Default value: none