D-Link DAS-3224 User Manual
D-Link DAS-3248 IP DSLAM
4
Figure 0-2 PPPoE application in DAS-3248/3224 with Ethernet-All-The-Way
Network
In addition to traditional ATM-based ADSL network. As Fig 0-2 displays,
the user application information is still encapsulated by ADSL CPE into
ATM cells in pre-defined VC (Virtual Channel, PVC), and then upstream
the ATM cells to DSLAM via ADSL link.
In the DAS-3248/3224, all the ATM cells belong to the specified VC are
decapsulated back to the original PPPoE encapsulated Ethernet packet (if
VLAN-mode of the specified ADSL port is disabled), or mapped to the
pre-defined Ethernet-VLAN packets (if VLAN-mode of the specified ADSL
port is enabled). DAS-3248/3224 concentrates all Ethernet-with/without
VLAN-tag packets from 48/24 ports’ ADSL and uplinks to ISP’s
Ethernet-All-The-Way network. The PPPoE frames will be resolved at
Broadband Access Server (BAS), and the user application information was
serviced.
The DAS-3248/3224 supports ADSL CPE Bridge-mode. For future FW
upgrade, the DAS-3248/3224 can act as BRAS to process user application
information directly.
DAS-3248/3224 provides Ethernet-with/without VLAN tag to ATM-PVC
mapping feature for the ISP to isolate user’s data with security and to