D-Link DAS-3224 User Manual

 

129

 

successfully complete initialization.   
Type              :    Modify -- Optional   
Valid values: 0 - 310   

atucmaxsnrmargin 
atucmaxsnrmargin   

Configured Maximum acceptable Signal/Noise 
Margin. If the Noise Margin is above this, the 
modem should attempt to reduce its power 
output to optimize its operation.   
Type              : Modify --  Optional  
Valid values: 0 - 310   

atucgsrsintcorrectionup 
125us | 250us | 500us | 1ms 
| 2ms | 4ms | disable   

Sets the correction time for the upstream 
interleaved buffer. RS can also be disabled.   
Type :    Modify -- Optional   

atucdnshiftsnrmargin 
atucdnshiftsnrmargin   

Configured Signal/Noise Margin for rate 
downshift. If the noise margin falls below this 
level, the modem should attempt to decrease its 
transmit rate. In the case that RADSL mode is 
not present, the value will be 0.   
Type              :    Modify -- Optional   
Valid values: 0 - 310   

Configured Signal/Noise Margin for rate upshift. If 
the noise margin rises above this level, the 
modem should attempt to increase its transmit 
rate. In the case that RADSL is not present, the 
value will be 0.   
Type              : Modify --    Optional   
Valid values: 0 - 310   

Minimum time that the current margin is above 
UpshiftSnrMgn, before an upshift occurs. In the 
case that RADSL is not present, the value will be 
0.  
Type              :    Modify -- Optional   
Valid values: 0 - 16383   

Minimum time that the current margin is below 
DownshiftSnrMgn, before a downshift occurs. In 
the case that RADSL is not present, the value will 
be 0.   
Type              :    Modify -- Optional   

Get   -- Optional  

Configured Minimum Transmit rate for 'Fast' 
channels, in bps. Also refer to 
'adslAtucConfRateChanRatio' for information 
regarding RADSL mode. Refer to ATU-R transmit 
rate for ATU-C receive rates.   
Type              : Modify --    Optional   
Valid values: 0 - 0xffffffff   

Configured Minimum Transmit rate for 
'Interleave' channels, in bps. Also refer to 
'adslAtucConfRate-ChanRatio' for information 
regarding RADSL mode and refer to ATU-R 
transmit rate for ATU-C receive rates.   
Type              :    Modify --Optional   
Valid values: 0 - 0xffffffff   

Configured Maximum Transmit rate for 'Fast' 
channels, in bps. Also refer to 
'adslAtucConfRateChanRatio' for information 
regarding RADSL mode. Refer to ATU-R transmit 
rate for ATU-C receive rates.   
Type              : Modify --    Optional