D-Link DAS-3224 User Manual

 

145

 

object is, by default disable.   

OpStateTrapEnable   Enables/disables 

the OpStateChangeTrap.   

Thresh 15Min 
Lofs(sec)   

The number of Loss of Frame Seconds 
encountered by an ADSL interface, within any given 
15 minutes performance data collection period, 
which causes the SNMP agent to send an 
'adslAturPerfLofsThreshTrap'.  

Thresh 15Min 
Loss(sec)   

The number of Loss of Signal Seconds 
encountered by an ADSL interface, within any given 
15 minutes performance data collection period, 
which causes the SNMP agent to send an 
'adslAturPerfLossThreshTrap'.  

Thresh 15Min 
Lprs(sec)   

The number of Loss of Power Seconds 
encountered by an ADSL interface, within any given 
15 minutes performance data collection period, 
which causes the SNMP agent to send an 
'adslAturPerfLprsThreshTrap'.  

Thresh 15Min 
Ess(sec)   

The number of Errored Seconds encountered by an   
ADSL interface, within any given 15 minutes 
performance data collection period, which causes 
the SNMP agent to send an 
'adslAturPerfESsThreshTrap'.  

Thresh Fast Rate 
Up(bps)   

Applies to 'Fast' channels only. Configured change   
in rate causing an adslAturRateChangeTrap A trap 
is produced when, ChanCurrTxRate > 
ChanPrevTxRate plus the value of this object.   

Thresh Intl Rate 
Up(bps)   

Applies to 'Interleave' channels only. Configured 
change in rate causing an 
adslAturRateChangeTrap. A trap is produced 
when, ChanCurrTxRate > ChanPrevTxRate plus 
the value of this object.   

Thresh Fast Rate 
Down(bps)   

Applies to 'Fast' channels only. Configured change 
in rate causing an adslAturRateChangeTrap. A trap   
is produced when, ChanCurrTxRate < 
ChanPrevTxRate minus the value of this object.   

Thresh Intl Rate 
Down(bps)   

Applies to 'Interleave' channels only. Configured   
change in rate causing an 
adslAturRateChange-Trap A trap is produced 
when, ChanCurrTxRate < ChanPrevTxRate minus 
the value of this object.   

Caution              None  

References    • ADSL commands.   

  get adsl atur trapsext 

Description: This command is used to get. 

Command Syntax: get adsl atur trapsext [ ifname ifname ] 

$ get adsl atur trapsext ifname dsl-0 

 
Output    

Ifname : dsl-0 
SesL Thresh 15Min Trap : 1 UasL Thresh 15Min Trap : 0 
Lofs Thresh 1Day Trap : 1 Loss Thresh 1Day Trap : 0 
Lprs Thresh 1Day Trap : 1 ESs Thresh 1Day Trap : 1 
SesL Thresh 1Day Trap : 1 UasL Thresh 1Day Trap : 0 

 

Output field description