D-Link DAS-3224 User Manual
D-Link DAS-3248 IP DSLAM
157
Curr15Min/Curr1Day/Prev1Day : Count of all
encoded blocks received with uncorrected errors on
this channel, in the current 15 minute/ current 1
day/ previous 1 day interval.
encoded blocks received with uncorrected errors on
this channel, in the current 15 minute/ current 1
day/ previous 1 day interval.
NCD Count
Performance Data: Number of packets with NCD
(No Cell Delineation) errors.
Curr15Min/Curr1Day/Prev1Day: Number of packets
with NCD error, received in the current 15-minute/
current 1-day/ previous 1-day interval.
(No Cell Delineation) errors.
Curr15Min/Curr1Day/Prev1Day: Number of packets
with NCD error, received in the current 15-minute/
current 1-day/ previous 1-day interval.
HEC Count
Performance Data: Number of packets with HEC
error. Curr15Min/Curr1Day/Prev1Day: Number of
packets with HEC error received in the current 15
minute/ current 1 day/ previous 1 day interval.
error. Curr15Min/Curr1Day/Prev1Day: Number of
packets with HEC error received in the current 15
minute/ current 1 day/ previous 1 day interval.
Caution None
References • ADSL commands
5.5.46 ADSL ATUR Chanintrvl Commands
get adsl atur chanintrvl
Description: This command is used to get.
Command Syntax: get adsl atur chanintrvl ifname ifname [sintrvl sintrvl]
[nintrvl nintrvl]
Parameters
Name
Description
ifname ifname
The ADSL interface name.
Type : Get – Mandatory
Valid values: dsli-0 – dsli-*, dslj-0 – dslj- *.
Type : Get – Mandatory
Valid values: dsli-0 – dsli-*, dslj-0 – dslj- *.
sintrvl sintrvl
Start interval number. Performance Data Interval number 1 is the
most recent previous interval; interval 96 is 24 hours ago.
Type : Get – Optional
Valid values : 1- 96
Default Value : 1
most recent previous interval; interval 96 is 24 hours ago.
Type : Get – Optional
Valid values : 1- 96
Default Value : 1
nintrvl nintrvl
Number of 15 minutes intervals.
Type : Get -- Optional
Valid values: 1 - 96
Default value: 12
Type : Get -- Optional
Valid values: 1 - 96
Default value: 12
5.5.47 System Configuration Save And Restore Commands
commit
Description: Use this command to commit the active configuration to the
flash.
Command Syntax: commit
Parameters
None