D-Link DAS-3224 User Manual
D-Link DAS-3248 IP DSLAM
182
Command Syntax: delete snmp traphost ip ip [port port]
modify snmp traphost
Description: Use this command to modify
Command Syntax: modify snmp traphost ip ip [port port] [ version v1 |
v2c ]
Parameter
Name
Description
port port
This specifies the Port at which the trap is to be
sent.
Type: Create --Optional Get Optional Modify –
Optional Delete -- Optional
Default value: 162
sent.
Type: Create --Optional Get Optional Modify –
Optional Delete -- Optional
Default value: 162
version v1 | v2c
This specifies the Trap version to be sent to the
Manager.
Type: Create --Optional Get Optional
Modify -- Optional
Default value: v2c
Manager.
Type: Create --Optional Get Optional
Modify -- Optional
Default value: v2c
Example $ create snmp traphost ip 172.25.34.34 community public
Output Verbose Mode On
Output Verbose Mode On
Entry Created
Ip Addres
s : 172.25.34.34
Community : public
Port : 162 Version : v2c
Port : 162 Version : v2c
Verbose Mode Off:
Entry Created
Output field description
Field
Description
Ip Address
This specifies the IP address of the manager where
trap is to be sent.
trap is to be sent.
Community
This specifies the Community name used in the
trap.
trap.
Port
This specifies the Port at which the trap is to be
sent.
sent.
Version
This specifies the Trap version to be sent to the
Manager.
Manager.
Caution None.
References • SNMP commands
5.5.64 File Commands
apply
Description: Use this command to apply a configuration file stored on the
system
Command Syntax: Apply fname file-name [version version]
[bestefforttrue|false]
Parameters
Name
Description