D-Link DAS-3224 User Manual
D-Link DAS-3248/3224 IP DSLAM
70
3. After that, the fields become enable. Input the values in those fields and
then name the new line profile.
Note: if the annex type is set as annex A, the power attenuation
drop-down list will appear as follows:
4. Click on
to submit your setting or click on
to
deliete a line profile.
Table 4-7 Line Profile Field Definitions
Field
Definition
Line Type
The ADSL line type, Fast or Interleaved
Transmit Rate Adaption
Defines what form of transmitting rate to be
adaptated, fixed or adaptAtStartup
adaptated, fixed or adaptAtStartup
Target SNR (dB/10)
Target Signal / Noise Margin.(0-310)
Min Tx Rate(bps)
The minimum transmitting rate of ATU-C side
or ATU-R side.
or ATU-R side.
Down Shift SNR (dB/10)
Configured Signal/ Noise Margin for rate
downshift. If the noise margin falls below this
level, the modem should attempt to decrease
its transmit rate. In the case that RADSL
mode is not present, the value will be 0.
downshift. If the noise margin falls below this
level, the modem should attempt to decrease
its transmit rate. In the case that RADSL
mode is not present, the value will be 0.