D-Link DFL-2500 User Manual
24.3. Scenario: Enabling SLB
267
This example describes how SLB can be used to load balance SSH
connections to two SSH servers behind a D-Link Firewall connected to the
Internet with IP address ip ext, as shown in Figure
connections to two SSH servers behind a D-Link Firewall connected to the
Internet with IP address ip ext, as shown in Figure
. The two SSH
servers have the private IP addresses 192.168.1.10 and 192.168.1.11.
WebUI
:
1. Create Objects
First of all we need to create local objects to keep the IP address for
each server.
Objects
each server.
Objects
→
Address Book
→
Add
→
IP4 Host/Network:
Name: SSH Server1
IP Address: 192.168.1.10
Then click OK
IP Address: 192.168.1.10
Then click OK
Objects
→
Address Book
→
Add
→
IP4 Host/Network:
Name: SSH Server2
IP Address: 192.168.1.11
Then click OK
IP Address: 192.168.1.11
Then click OK
2. Create SAT SLB Rule
Next step is to set up the SAT SLB rule.
Rules
Rules
→
IP Rules
→
Add
→
IP Rule:
Name: SSH SLB
Action: SLB SAT
Service: ssh
Source Interface: any
Source Network: all-nets
Destination Interface: core
Destination Network: ip ext
Action: SLB SAT
Service: ssh
Source Interface: any
Source Network: all-nets
Destination Interface: core
Destination Network: ip ext
SAT Server Load Balancing
Server Addresses: Select SSH Server1 and SSH Server2.
Then click OK
Server Addresses: Select SSH Server1 and SSH Server2.
Then click OK
D-Link Firewalls User’s Guide