D-Link DFL-1600 Reference Guide
Parameters
protocol
Context Parameters
2.8.10. no_return_route (ID: 00600014)
Default Severity
Log Message
Failed to open a new connection since a return route to the sender
address cant be found. Dropping packet
address cant be found. Dropping packet
Explanation
There was no return route found to the sender address of the packet.
Therefore, a new connection could not be opened and the packet is
dropped.
Therefore, a new connection could not be opened and the packet is
dropped.
Gateway Action
reject
Recommended Action
None.
Revision
1
Context Parameters
2.8.11. reverse_connect_attempt (ID: 00600015)
Default Severity
Log Message
Disallowed reverse connect attempt from peer. Dropping
Explanation
State inspector does not allow this packet in reverse direction on the
already opened connection. This type of packet is only allowed to be
sent by the originator of a connection. Dropping the packet.
already opened connection. This type of packet is only allowed to be
sent by the originator of a connection. Dropping the packet.
Gateway Action
drop
Recommended Action
None.
Revision
1
Context Parameters
2.8.12. port_0_illegal (ID: 00600020)
Default Severity
Log Message
TCP/UDP destination port or TCP source port was set to 0. Dropping
Explanation
The TCP/UDP destination or TCP source port was set to 0, which is
not allowed. Dropping packet.
not allowed. Dropping packet.
Gateway Action
drop
2.8.10. no_return_route (ID: 00600014)
Chapter 2. Log Message Reference
164