D-Link DFL-1600 Reference Guide
2.32.24. pptp_no_userauth_rule_found (ID: 02700026)
Default Severity
Log Message
Did not find a matching userauth rule for the incoming PPTP
connection. Interface: <iface>, Remote gateway: <remotegw>.
connection. Interface: <iface>, Remote gateway: <remotegw>.
Explanation
The PPTP server was unsuccessful trying to find a userauth rule
matching the incoming PPTP connection.
matching the incoming PPTP connection.
Gateway Action
None
Recommended Action
Make sure the userauth rules are configured correctly.
Revision
1
Parameters
iface
remotegw
remotegw
2.32.25. malformed_packet (ID: 02700027)
Default Severity
Log Message
Malformed packet received from <remotegw> on <iface>. Error code:
<error_code>
<error_code>
Explanation
A malformed packet was received by the PPTP interface.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
error_code
remotegw
error_code
2.32.26. waiting_for_ip_to_listen_on (ID: 02700050)
Default Severity
Log Message
PPTP server <iface> cannot start until it has an IP address to listen on.
Explanation
The PPTP server cannot start until it has a proper IP address to listen
on.
on.
Gateway Action
None
Recommended Action
Make sure that the IP address is configured correctly on the PPTP
server interface. If the PPTP server is supposed to listen on an IP
assigned by a DHCP server, make sure that the DHCP server is
working properly.
server interface. If the PPTP server is supposed to listen on an IP
assigned by a DHCP server, make sure that the DHCP server is
working properly.
Revision
1
Parameters
iface
2.32.25. malformed_packet (ID:
02700027)
02700027)
Chapter 2. Log Message Reference
376