D-Link DFL-1600 Reference Guide
Recommended Action
If the maximum number of FTP sessions is too low, increase it.
Revision
1
Parameters
max_sessions
Context Parameters
2.1.101. failed_create_new_session (ID: 00200242)
Default Severity
Log Message
FTPALG: Failed to create new FTPALG session (out of memory)
Explanation
An attempt to create a new FTPALG session failed, because the unit is
out of memory.
out of memory.
Gateway Action
close
Recommended Action
Decrease the maximum allowed FTPALG sessions, or try to free some
of the RAM used.
of the RAM used.
Revision
1
Context Parameters
2.1.102. failure_connect_ftp_server (ID: 00200243)
Default Severity
Log Message
FTPALG: Failed to connect to the FTP Server. Closing connection
Explanation
The unit failed to connect to the FTP Server, resulting in that the ALG
session could not be successfully opened.
session could not be successfully opened.
Gateway Action
close
Recommended Action
Verify that there is a listening FTP Server on the specified address.
Revision
1
Context Parameters
2.1.103. content_type_mismatch (ID: 00200250)
Default Severity
Log Message
FTPALG: Content type mismatch in file <filename>. Identified
filetype <filetype>
filetype <filetype>
Explanation
The filetype of the file does not match the actual content type. As there
is a content type mismatch, data is discarded.
is a content type mismatch, data is discarded.
Gateway Action
data_blocked_control_and_data_channel_closed
Recommended Action
None.
2.1.101. failed_create_new_session
(ID: 00200242)
(ID: 00200242)
Chapter 2. Log Message Reference
76