D-Link DSL-2750U_B1A_T2A User Manual
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Description
IMEI
The code stored in the memory of the USB modem.
Signal level
The signal level at the input of the modem's receiver. The zero signal
level shows that you are out of the coverage area of the selected
operator's network.
level shows that you are out of the coverage area of the selected
operator's network.
Operator name
When the needed network is available, the name of the operator is
displayed in this field.
displayed in this field.
Mode
A type of the network to which the USB modem is connected (2G or 3G).
PIN
On the USB modem / PIN page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for CDMA USB modems.
Figure 106. The USB modem / PIN page.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Enter button.
code in the PIN code field and click the Enter button.
To enable the PIN code check, deselect the Disable PIN check checkbox, enter the PIN code,
used before disabling the check, in the PIN code field and click the Enter button.
used before disabling the check, in the PIN code field and click the Enter button.
Page 146 of 174