D-Link DAS-3216_revB User Manual
DAS3series LCT Operation Menus
71
Diagnostic Menu
The diagnostic menu provides test function from ADSL physical layer to ATM layer.
ADSL2 DELT Test
DELT is primarily used for reactive tests on a loop after a CPE has been deployed, either to help
troubleshoot a line or to capture a baseline of loop characteristics at the time of installation.
DELT can determine the ADSL2+ data rate (up/down), loop attenuation (up/down), SNR (up/down),
and noise (up/down).
troubleshoot a line or to capture a baseline of loop characteristics at the time of installation.
DELT can determine the ADSL2+ data rate (up/down), loop attenuation (up/down), SNR (up/down),
and noise (up/down).
Figure 3-59
ADSL2 DELT Run & Report Dialog
Table 3-43
Monitoring DELT Run & Report
Item
Description
Port selection menu
Please select a port to perform DELT.
Operation State
This object identifies the high level operational state for the ATU.
Here is the state flow:
data (Click START) → handshake → discovery → delt Training → delt
(Diagram is displayed) ->handshake -> discovery → Training → data
Here is the state flow:
data (Click START) → handshake → discovery → delt Training → delt
(Diagram is displayed) ->handshake -> discovery → Training → data
DAS3series IP-DSLAM
System Configuration Guide
System Configuration Guide