D-Link DAS-3216 User Manual
D-Link DAS-3216 ADSL IP DSLAM
97
Displaying the Channel Layer Information
Describes how to display the channel Layer information of a port or all ports on
CO side, remote side, or both sides.
CO side, remote side, or both sides.
Command: show adslchannel <all | port no.> [c | r]
Argument List:
Parameter Description
all | port no.
all | port no.
Show all information | show specific port
(c/r) CO/Remote
Example: Display the channel information of port 1/8 on CO side.
IPDSLAM# show adslchannel 8 c
ATU-C:
1. Interleave Delay: 16
2. Previous Tx rate: 7616
2. Current Tx Rate: 8064
3. CRC Block Length: 544
ATU-C:
1. Interleave Delay: 16
2. Previous Tx rate: 7616
2. Current Tx Rate: 8064
3. CRC Block Length: 544
Table 4-22 “show adslchannel” Field Definition”
Field Definition
Interleave Delay
Interleave Delay
Interleave delay for this channel. (mili-seconds)
Previous Tx Rate
Previous actual transmit rate on this channel if
ADSL loop retrain. (Kbps)
ADSL loop retrain. (Kbps)
Current Tx Rate
Actual transmit rate on this channel. (Kbps)
CRC Block Length
The length of the channel data-block on which the
CRC operates.
CRC operates.
Displaying Physical Performance Statistics within Current 15
Minutes and 1 Day Duration
Minutes and 1 Day Duration
Describes how to display the physical performance statistics of a port or all port
on CO side, remote side, or both sides during current 15 minutes and a day
duration.
on CO side, remote side, or both sides during current 15 minutes and a day
duration.
Command: show adslphperf <all | port no.> [c | r]
Argument List:
Parameter Description
all | port no.
all | port no.
Show all information | show specific port
(c/r) CO/RT
Example: Display the physical performance of port 8 on remote side during
current 15 minutes and 1-day duration.
current 15 minutes and 1-day duration.