D-Link DAS-3216 User Manual

 
 

                                                                 

 

36 

Table 3-4    Create Alarm Profile Field Definitions 

Field Definition 
Loss of frame within 15 
minutes 

The threshold of the number of “Loss of Frame 
Seconds” within 15 minutes performance data 
collection period. 

Loss of signal within 15 
minutes 

The threshold of the number of “Loss of Signal 
Seconds” within 15 minutes performance data 
collection period. 

Loss of link within 15 
minutes 

The threshold of the number of “Loss of Link 
Seconds” within 15 minutes performance data 
collection period. (But only ATU-C side) 

Loss of power within 
15 minutes   

The threshold of the number of “Loss of Power 
Seconds” within 15 minutes performance data 
collection period. 

Errored seconds 

The threshold of the number of “Errored 
Seconds” within 15 minutes performance data 
collection period. 

Failure Trap 

Enable or disable the Initial Failure Trap. Default 
setting is disable. (Only on ATU-C side) 

 

2. Configure the name of alarm profile as alarm1. 

3. Configure the alarm profile on CO side (Down Stream). For example,   

Configure the Lofs, Loss, Lols, Lprs, Ess, and initial failure trap as 0sec, 0sec, 
0sec, 0sec, 0sec, and Disable initial failure trap.   

4. Configure the alarm profile on RT side (Up Stream). For example,   

Configure the Lofs, Loss, Lprs, and Ess as 0sec, 0sec, 0sec, and 0sec. 

5. Click on the Apply button to submit your changes, or click on the Cancel 
button if you want to clear all the values you have configured. 

Note: The alarm profile can be created maximum up to 10 profiles. 

Allow you to view, modify, or delete existing ADSL line profiles. 

1. Click on “Current Line Profile” of the DSL Profile configuration Menu. 

      The Current Line Profile screen appears as follows: