D-Link DFL-1600 Software Guide

above this percentage. (Default: 80)

IfaceMon_BelowIfaceLoad

Temporarily disable interface monitor on an interface if net-
work load on the interface goes above this percentage.
(Default: 70)

IfaceMon_MinInterval

Minimum interval between two resets of the same interface.
(Default: 30)

IfaceMon_RxErrorPerc

At what percentage of errors to received packets to declare a
problem. (Default: 20)

IfaceMon_TxErrorPerc

At what percentage of errors to sent packets to declare a prob-
lem. (Default: 7)

IfaceMon_ErrorTime

How long a problem must persist before an interface is reset.
(Default: 10)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.55.7. FragSettings

Description

Settings related to fragmented packets.

Properties

PseudoReass_MaxConcurrent

Maximum number of concurrent fragment reassemblies. Set
to 0 to drop all fragments. (Default: 1024)

IllegalFrags

Illegaly constructed fragments; partial overlaps, bad sizes,
etc. (Default: DropLog)

DuplicateFragData

On receipt of duplicate fragments, verify matching data...
(Default: Check8)

FragReassemblyFail

Failed packet reassembly attempts - due to timeouts or packet
losses. (Default: LogSuspectSubseq)

DroppedFrags

Fragments of packets dropped due to rule base. (Default:
LogSuspect)

DuplicateFrags

Duplicate fragments received. (Default: LogSuspect)

FragmentedICMP

Fragmented ICMP messages other than Ping; normally inval-
id. (Default: DropLog)

MinimumFragLength

Minimum allowed length of non-last fragments. (Default: 8)

ReassTimeout

Timeout of a reassembly, since previous received fragment.
(Default: 65)

ReassTimeLimit

Maximum lifetime of a reassembly, since first received frag-
ment. (Default: 90)

3.55.7. FragSettings

Chapter 3. Configuration Reference

190