D-Link DFL-1600 Software Guide
3.57. ThresholdRule
Description
A Threshold Rule defines a filter for matching specific network traffic. When the filter criterion is
met, the Threshold Rule Actions are evaluated and possible actions taken.
met, the Threshold Rule Actions are evaluated and possible actions taken.
Properties
Index
The index of the object, starting at 1. (Identifier)
Name
Specifies a symbolic name for the rule. (Optional)
SourceInterface
Specifies the name of the receiving interface to be compared to
the received packet.
the received packet.
SourceNetwork
Specifies the sender span of IP addresses to be compared to the re-
ceived packet.
ceived packet.
DestinationInterface
Specifies the the destination interface to be compared to the re-
ceived packet.
ceived packet.
DestinationNetwork
Specifies the span of IP addresses to be compared to the destina-
tion IP of the received packet.
tion IP of the received packet.
Service
Specifies a service that will be used as a filter parameter when
matching traffic with this rule.
matching traffic with this rule.
Schedule
By adding a schedule to a rule, the security gateway will only al-
low that rule to trigger at those designated times. (Optional)
low that rule to trigger at those designated times. (Optional)
Comments
Text describing the current object. (Optional)
Note
If no
Index
is specified when creating an instance of this type, the object will be
placed last in the list and the
Index
will be equal to the length of the list.
3.57.1. ThresholdAction
Description
A Threshold Rule Action specifies what thresholds to measure, and what action to take if those
thresholds are reached.
thresholds are reached.
Properties
Action
Protect or Audit. (Default: Protect)
GroupBy
Specifies whether the threshold should be host- or network-
based. (Default: SourceIP)
based. (Default: SourceIP)
Threshold
Specifies the threshold.
3.57. ThresholdRule
Chapter 3. Configuration Reference
205