KitchenAid 24" Undercounter Refrigerator with Stainless Steel Door Use & Care Manual

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

■

Remove tape and glue residue from surfaces before turning 
on the refrigerator. Rub a small amount of liquid dish soap 
over the adhesive with your fingers. Wipe with warm water 
and dry.

■

Do not use sharp instruments, rubbing alcohol, flammable 
fluids, or abrasive cleaners to remove tape or glue. These 
products can damage the surface of your refrigerator. For 
more information, see “Refrigerator Safety.”

■

Dispose of/recycle all packaging materials.

After you remove all of the package materials, clean the inside of 
your refrigerator before using it. See the cleaning instructions in 
“Refrigerator Care.”

Door Closing

Your refrigerator has four leveling legs. If your refrigerator seems 
unsteady or you want the door to close more easily, adjust the 
refrigerator’s tilt using the instructions below.

1. Plug into a grounded 3 prong outlet.

2. Move the refrigerator into its final location. 

3. Turn the leveling legs to the right to lower the refrigerator or 

turn the leveling legs to the left to raise it. It may take several 
turns of the leveling legs to adjust the tilt of the refrigerator. 

NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling legs. This 
makes it easier to adjust the leveling legs.

4. Open the door again to make sure that it closes as easily as 

you like. If not, tilt the refrigerator slightly more to the rear by 
turning both front leveling screws to the left. It may take 
several more turns, and you should turn both leveling legs the 
same amount.

Your refrigerator is heavy. When moving the refrigerator for 
cleaning or service, be sure to cover the floor with 
cardboard or hardboard to avoid floor damage. Always pull 
the refrigerator straight out when moving it. Do not wiggle or 
“walk” the refrigerator when trying to move it, as floor 
damage could occur.

Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
Tempered glass is designed to shatter into many small, 
pebble-size pieces. This is normal. Glass shelves and covers 
are heavy. Use both hands when removing them to avoid 
dropping.