KitchenAid 24" Panel Ready Wine Cellar with Glass Door and Wood-Front Racks Use & Care Manual

Custom Overlay Frame

If you plan to install a custom overlay frame, you will need to 
create the frame yourself or consult a qualified cabinetmaker or 
carpenter. See dimension drawings for frame specifications.

IMPORTANT: 

■

The thickness of the overlay frame must be 

³⁄₄" (19 mm).

■

The overlay frame must not weigh more than 10 lbs (4.54 kg). 
Overlay frames weighing more than recommended may 
cause damage to your appliance.

■

Overlay frame drawings show the rear view of the frame.

1. Create a custom overlay frame using the dimensions shown.

■

The views of the top and bottom hinge pin hole show a right-
hand hinge. Mirror the image for a left-hand hinge.

■

We recommend using a C-clamp and two pieces of scrap 
wood (front and back) to help reinforce the overlay frame 
when drilling the hinge pin holes. 

1. Using a 

³⁄₈" brad point doweling drill bit, drill a hole, 

¹⁄₄" (7.0 mm) deep, into the top of the overlay frame for 
the top hinge pin. Remove the excess wood surrounding 
the hole by using the rotary tool to complete the hinge 
depression as shown.

2. Using a 

³⁄₈" brad point doweling drill bit, drill a hole, 

³⁄₈" (10 mm) deep, in the bottom of the overlay frame for the 
bottom hinge pin. Remove the excess wood surrounding the 
hole by using the rotary tool to complete the hinge 
depression as shown.

⁄₈

⁄₈