KitchenAid KDTM704EBS Use & Care Manual

Dishwasher Features

®

The ProScrub

®

 option wash area is located at the back of the lower 

level rack and the front corners of the upper level rack.

NOTE: You must select the ProScrub

®

 or ProScrub

®

 Upper (on 

some models) option to use these features. Make sure items do not 
interfere with the water feed tube, spray arms, or the lower rack 
ProScrub

®  

spray jets.

■

Keep the last tine row in the back of the lower rack in the 
60° angled position when using the ProScrub

®

 option.

■

In the back of the lower rack, load pans, casserole dishes, etc. 
with the soiled surfaces facing the ProScrub

®

 spray jets and 

resting on the last row of tines in the angled position. 

■

Only one row of items may face the ProScrub

®

 spray jets. 

Stacking, overlapping or nesting items will keep the ProScrub

®

 

spray jets from contacting all of the surfaces.

■

When using ProScrub

®

 Upper place tall or oddly shaped 

glasses or bottles in the front corners of the upper rack face 
down. It is best to load these items in between rows of tines.

Silverware basket lids:
Use silverware basket lids to provide optimal spacing and best 
cleaning performance. 

NOTE: If your silverware does not fit into the designated slots, 
push tabs inward on either end and lift lid off of the silverware 
baskets. Mix silverware types to keep them separated. Load knives 
down, forks up, and alternate spoons for best cleaning results.

If additional space is needed 
in the upper rack, the third 
level rack can easily be 
removed.

To remove, fully extend rack until it stops. Then, open the track 
stops on each side and lift to remove. 

Low profile items 
such as serving 
utensils and 
silverware may be 
loaded on the third 
level rack.

Fold down the extra shelf on the left-hand or right-hand side of the 
upper level rack to hold additional cups, stemware or long items 
such as utensils and spatulas.

The row of tines on the left-hand and 
right-hand sides of the top rack can 
be adjusted to make room for a 
variety of dishes.

To adjust the fold-down tines:
1. Grasp the tip of the tine that is in 

the tine holder.

2. Gently push the tine out of 

the holder.

3. Lay the tines down, toward the 

center of the rack.

NOTE: The bottom rack may also 
have 1 or 2 rows of flexible tines located in the back of the rack. 
Follow the same instructions to adjust. 

You can raise or lower the top rack to fit tall items in either the top 
or bottom rack. Adjusters are located on each side of the top rack. 
Each adjuster has 2 preset positions. 

To raise the rack,

press both rack adjusters and lift the rack until it 

is in the up position and level.

To lower the rack, 
press both rack 
adjusters and 
slide the rack to 
its down position 
and level.

A