KitchenAid 30" Single Wall Oven with Even-Heat™ True Convection Installation Guide

IMPORTANT: Use the 3-wire cable from home power supply 
where local codes permit a 3-wire connection.

1. Connect the 2 black wires (C) together using a UL listed wire 

connector.

2. Connect the 2 white wires (D) and the green (or bare) ground 

wire (of the oven cable) using a UL listed wire connector.

3. Connect the 2 red wires (G) together using a UL listed wire 

connector.

4. Install junction box cover.

1. Using 2 or more people, lift the oven partially into the cabinet 

cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of the oven front frame when 
pushing the oven into the cabinet. Do not push against the 
outside edges.

2. Push against the seal area of the front frame to push the oven 

into the cabinet until the back surface of the front frame 
touches the front wall of the cabinet.

3. Push oven completely into the cabinet and center the oven 

into the cabinet cutout.

4. Remove the tape from black front trims.

■

Securely fasten the oven to the cabinet using the #8-14 x 
¾" screws provided.

■

Insert the screws through hole in black trim aligning with 
hole in oven frame. Do not overtighten screws.

B

C

D

E

F

H

G

A

I

A

B

C