Nikon D7000 User Manual

224

U

❚❚Manual

Choose a flash level between Full and 1/128 (

1

/

128

 of full power). At full power, the 

built-in flash has a Guide Number of 12/39 (m/ft., ISO 100, 20°C/68°F).

❚❚Repeating Flash

The flash fires repeatedly while the shutter is open, producing 
a strobe-light effect. Press 

4 or 2 to highlight the following 

options, 

1 or 3 to change.

Choose flash output (expressed as a fraction of full power).

Choose the number of times the flash fires at the selected 
output. Note that depending on shutter speed and the 
option selected for Frequency, the actual number of flashes 
may be less than selected.

Choose how often the flash fires per second.

A

The flash control mode for the built-in flash is shown in the 
information display.

A

Y icons blink in the control panel and viewfinder when these options are selected.

A

When an optional SB-400 flash unit is attached and turned on, Custom 
Setting e3 changes to Optional flash, allowing the flash control mode 
for the SB-400 to be selected from TTL and Manual (Repeating flash 
and Commander mode options are not available).

A

The options available for Repeating Flash > Times are determined by flash output.

2

2–10, 15

2–5

2–10, 15, 20, 25

2–10

2–10, 15, 20, 25, 30, 35