Nikon AT-10 Transparency Adapter User Manual
6
Nikon
Transparency Unit User’s Manual
3. Installing the
Transparency Unit
Step 1
Turn your scanner off, and unplug the power
cord.
cord.
Step 2
Remove the document cover by lifting it up
from the scanner to separate the guide posts
from their receptacles.
from the scanner to separate the guide posts
from their receptacles.
3. Installing the AT-10
Step 3
Position the hinge brackets of the transparency
unit over the supporting posts on the scanner so
that the posts fit into the holes in both hinge
brackets.
unit over the supporting posts on the scanner so
that the posts fit into the holes in both hinge
brackets.
Step 4
Gently slide the transparency unit so that the
supporting posts move into the narrow sections
of the holes.
supporting posts move into the narrow sections
of the holes.
Step 5
Insert screws into the center of each hinge
bracket and tighten them down.
bracket and tighten them down.