Nikon WT-1A (D2H, D2Hs & D2X [w/firmware 1.1]) User Manual

2

 Before connecting the WT-1, set the USB option 

in the camera setup menu to PTP.

1

 Turn the camera on.

3

 Turn the camera off.

5

 Place the camera on the WT-1 and rotate the knob 

in the direction shown to fasten the WT-1 to the 
camera tripod mount.

4

 Remove the cover protecting the camera power 

contact.  The cover can be stored in the housing 
on the WT-1.

6

 Open the camera USB connector cover and con-

nect the USB cable to the USB connector.

7

 Pass the cable over the guide on the BL-2 battery-

chamber cover.

OK

USB

Mass Storage

PTP

SET  UP