Nikon UT-1 Communication Unit User Manual

119

Tr

oubl

eshoot

in

g

“POWER” LED does not 
light.

• Turn the UT-1 on.
• Confirm that the battery is 

inserted and fully charged.

Wireless transmitter 
option not available.

Confirm that the UT-1 is 
connected and on.

The Device info, and 
Device settings menus 
cannot be selected.

Confirm that the UT-1 is 
connected and on.

Excessive radio 
interference.

Adjust the position of the wireless 
access point or host computer.

—

All LEDs flash at once.

UT-1 hardware or battery 
malfunction. Contact a Nikon-
authorized service representative.

—

Camera displays TCP/IP or 
FTP error.

• Check settings for host and/or 

wireless LAN adapter and adjust 
camera settings appropriately.

• Check firewall settings.

Camera displays wireless 
error.

• Confirm that host and wireless 

LAN adapter are on.

• Ensure that there are no 

obstacles between UT-1 and 
wireless LAN adapter.

• Check settings for host and/or 

wireless LAN adapter and adjust 
camera settings appropriately.

—

—

Camera displays “Ethernet 
cable is not connected”.

Connect Ethernet cable or 
change interface setting to 
Wireless & Ethernet.

Memory card error 
displayed.

Confirm that memory card is 
properly inserted.

—