Nikon R1C1 User Manual

19

z

Pre

paration

„ Control buttons on the SU-800

Press to turn the power on or off.
To avoid accidental firing or a malfunction when 
carrying the SU-800 in your camera bag, turn 
off the flash unit.

Press to select the items to be set. The 
selected item will blink and can be changed 
using the [

W] and [X] buttons.

Press for approx. 2 sec. to display another 
setting.

Press to turn the Target light (focus-assist 
illuminator). (p. 89)

Press for approx. 1 sec. to activate or cancel 
the target light. (p. 90)

Press to test fire the flash. (p. 88)

W] (left) Button

X] (right) Button

Press to change the values of the items or 
settings that are blinking.

Press to set the flash mode.

In the close-up mode, press to set the flash 
units in groups A and B to fire or to cancel.

Press any button on the SU-800 to turn the illuminator on (when the SU-800’s 
power is on), and it will remain lit for about 16 seconds.

• The SU-800’s control button illuminator comes on when the camera’s LCD panel 

illuminator is turned on.

• The control button illuminator goes out when the shutter is released.

Simultaneously press the [ON/OFF] and [MODE] buttons 
(two-button reset) to reset all settings (selected by the 
Commander/Close-up select switch) to their default 
values. The LCD panel will blink 3 times.