Nikon R1C1 User Manual
55
z
Functions a
nd use of the SU-800
2
Using the SU-800
1
Slide open the battery chamber lid
in the direction of the arrow.
in the direction of the arrow.
2
Install the battery, then close the
battery chamber lid by sliding it into
place.
battery chamber lid by sliding it into
place.
Use CR123A (3V) lithium batteries.
Replacing the battery
The low battery-power indicator blinks
when the SU-800’s ready-light does not
come on within about 30 seconds of the
power being turned on or after the flash
has fired.
when the SU-800’s ready-light does not
come on within about 30 seconds of the
power being turned on or after the flash
has fired.
• Replace the battery.
3
Turn off the camera and SU-800.
ON/OFF