Nikon WT-2A (D2X) User Manual

1

 Turn the camera off.

4

 Open the camera USB connector cover and con-

nect the USB cable to the USB connector.

5

 Pass the cable over the guide on the BL-2 battery-

chamber cover.

3

 Place the camera on the WT-2 and rotate the knob 

in the direction shown to fasten the WT-2 to the 
camera tripod mount.

2

 Remove the cover protecting the camera power 

contact.  The cover can be stored in the housing 
on the WT-2.

To disconnect the WT-2:
1 Turn the camera off.
2 Disconnect the USB cable.
3 Rotate the knob clockwise to unscrew the WT-2 from the camera tripod mount.
4 Replace the cover on the camera power contact.