Nikon D500 Getting Started Guide

Page of 62
6
Choose an AF-area mode according to your subject.
AF-area mode Control panel Viewfinder
Focus-point display
Description
Selection
Shooting
Single-point 
AF
The focus point is selected manually.  The camera focuses on the sub-
ject in the selected focus point only.  Choose for subjects you can keep 
framed in the selected focus point.
25-point 
dynamic-area 
AF
The focus point is selected manually. The camera focuses on the subject in 
the selected focus point when autofocus is initiated, but if the subject later 
leaves the selected point for brief periods, the camera will focus based on 
information from surrounding points (the edges of the area surrounding 
the selected focus point are shown by small dots, but all 25, 72, or 153 fo-
cus points in the area are used for focus).  Choose for low-contrast sub-
jects if the camera has difficulty focusing or for active subjects that are 
hard to keep framed in a single point, and in-
crease  the  number  of  points  if  the  subject  is 
moving unpredictably or occupies a large area 
of the frame. Choose a setting one level higher 
for subjects at the edge of the frame.
72-point 
dynamic-area 
AF
153-point 
dynamic-area 
AF
3D-tracking
The initial focus point is selected manually. While the shutter-release but-
ton is pressed halfway, the camera uses color information to track subjects 
that leave the selected focus point and selects new focus points as required.
Group-area 
AF
The  camera  focuses  using  all  the  focus  points  in  a  group  around  the 
point selected by the user, reducing the risk of the camera focusing on 
the  background.  Choose  for  subjects  that  are  difficult  to  photograph 
using a single focus point.
Auto-area AF
The  camera  automatically  detects  the  subject  and  selects  the  focus 
point.  Priority is given to the faces of any portrait subjects detected.
AF-Area Mode