Nikon LS-1000 User Manual
- 17 -
3.2
Display LED
The display LED is located on the front panel and shows the
scanner status.
scanner status.
Steady illumination:
Lights when power is supplied (READY
status).
status).
Blinking (about once every 1.5 seconds):
Blinks slowly during operation (BUSY status).
Also blinks when the power is switched on
and during initialization.
Also blinks when the power is switched on
and during initialization.
Fast blinking (about 5 times a second):
Blinks fast when an error occurs either in the
LS-1000 or in communication (ERROR
status).
LS-1000 or in communication (ERROR
status).
Note: The blinking cycle may sometimes be irregular, but this does
not necessarily signify a product malfunction.
not necessarily signify a product malfunction.
Status display LED