Nikon LS-1000 User Manual

- 27 -

The LS-1000 can scan different types of 35mm positive/negative
monochrome/color images.  In addition, it can scan a film strip
of up to 6 images or single mounted film.

The LS-1000 can scan mounted slides as they are.

• Confirm that the thickness of the mounted slides to be

scanned is between 1.1mm and 3.0mm.

• Ensure that the emulsion surface is facing in the proper

direction.

When the LS-1000 is installed vertically, insert the mounted
slide so that the emulsion surface is facing toward the right
(shiny surface facing left).

When the LS-1000 is installed horizontally, insert the
mounted slide so that the emulsion surface is facing
downward (shiny surface facing upward).

* All film has an emulsion surface and a base surface.  The

emulsion surface is slightly convex and concave.  The base
surface is neither concave nor convex and is shinier than the
emulsion surface.

Insert the mounted slide lengthways until it touches the back
inner wall.

Note:  Do not insert the mounted slide so that the width and
length of the mount are reversed.  If you do so, the LS-1000 will not
be able to scan both sides of the mounted slide.