Nikon WP-CP2 (Coolpix 5200/4200) User Manual

Page of 26
Check for Leaks Again
12
 Check for Leaks Again
Before use, be sure that the camera is functioning normally and that the 
case does not leak.  Failure to check for leaks before use could result in 
irreparable damage to the camera.
 Important!
After sealing the case, perform a fi nal check for leaks.
Immerse the case in water and check for leaks as 
described in Steps 3–6 of “Check the Case for 
Leaks” (
 6).  Check that the desiccant stays dry 
and that no water enters the case.  If a leak is 
detected, immediately remove the case from the 
water, dry the camera and case thoroughly, and 
check that the O-ring is intact and the case prop-
erly sealed.  If the cause of the leak can not be 
determined, take the case to a Nikon-authorized 
service representative.