Nikon D500 User Manual
211
4
0 307) and choose from the
following options:
• Pairing: Pair the flash unit with the
• Pairing: Pair the flash unit with the
WR-R10.
• PIN: Connect the camera and flash unit using a four-digit
PIN.
5
f: Establish a wireless connection.
Set the flash units to remote mode and set the devices to the
channel you selected in Step 3, then pair the flash units with
the WR-R10 according to the option selected in Step 4:
• Pairing: Initiate pairing on the flash unit and press the
Set the flash units to remote mode and set the devices to the
channel you selected in Step 3, then pair the flash units with
the WR-R10 according to the option selected in Step 4:
• Pairing: Initiate pairing on the flash unit and press the
WR-R10 pairing button. Pairing is complete when the LINK
lamps on the WR-R10 and flash unit flash orange and green;
once a connection is established, the flash unit LINK lamp
will light green.
lamps on the WR-R10 and flash unit flash orange and green;
once a connection is established, the flash unit LINK lamp
will light green.
• PIN: Use the flash unit controls to enter the PIN you selected
in Step 4. The flash unit LINK lamp lights green once a
connection is established.
connection is established.
Repeat Step 5 until all the remote flash units have been
paired.
paired.
You can now take photos as described on page 214.