Nikon D500 User Manual

353

: Choose an option for Flicker 

reduction that matches the frequency of the local AC power supply 
(

0 290).

: A flashing sign, flash, or other light 

source with brief duration was used during live view.
Smudges appear in photographs

: Clean front and rear lens elements. If 

problem persists, perform image sensor cleaning (

: Live view may end automatically 

to prevent damage to the camera’s internal circuits if:
• The ambient temperature is high 
• The camera has been used for extended periods in live view or to 

record movies 

• The camera has been used in continuous release modes for extended 

periods

If live view does not start when you press the 

a button, wait for the 

internal circuits to cool and then try again. Note that the camera may 
feel warm to the touch, but this does not indicate a malfunction.
Image artifacts appear during live view

: “Noise” (randomly-spaced bright 

pixels, fog, or lines) and unexpected colors may appear if you zoom in on 
the view through the lens (

0 46) during live view; in movies, the amount 

and distribution of randomly-spaced bright pixels, fog, and bright spots 
are affected by frame size and rate (

0 68). Randomly-spaced bright 

pixels, fog, or bright spots may also arise as a result of increases in the 
temperature of the camera’s internal circuits during live view; exit live 
view when the camera is not in use.
Can not measure white balance

: Subject is too dark or too bright (

: Image was not 

created with D500 (