Avocent DB-9 FM - RJ-45 Adapter 210129 User Manual
Product codes
210129
5
C H A P T E R
2
Hardware Installation and
Network Configuration
Network Configuration
ESP Serial Hub Kit Contents
•
ESP serial hub.
•
SuperSerial CD-ROM.
•
For ESP-2 MI and ESP-4 MI hubs: External power supply (PS) with attached PS-to-unit barrel
connector. The line cord for the power supply is appropriate to the intended country
of operation.
connector. The line cord for the power supply is appropriate to the intended country
of operation.
•
For ESP-8 MI and ESP-16 MI hubs: AC power cord.
Modular adaptors are available from Avocent; see Adaptors on page 77.
LEDs and Buttons
All LEDs and buttons are on the front of the ESP serial hub.
Table 2.1: LEDs and Buttons
Item
Models
Description
POWER
All
The POWER LED is lit when the hub is connected to a power source.
ONLINE
All
The ONLINE LED is lit (not blinking) when the hub’s self-test and initialization
procedures have completed successfully.
procedures have completed successfully.
On ESP-4 MI hubs at power up, the LED will blink rapidly until the hub is
initialized, then it will be lit (not blinking). If a problem occurs, the LED will turn off.
initialized, then it will be lit (not blinking). If a problem occurs, the LED will turn off.
10
ESP-2 MI and
ESP-4 MI
ESP-4 MI
The 10 LED is lit when the hub is connected to a 10 Mbps LAN, and the 100 LED
blinks when traffic is present on the 10 Mbps LAN.
blinks when traffic is present on the 10 Mbps LAN.
100
All
The 100 LED is lit when the hub is connected to a 100 Mbps LAN.
On ESP-2 MI and ESP-4 MI hubs, the 10 LED blinks when traffic is present on
the 100 Mbps LAN.
the 100 Mbps LAN.
LINK
ESP-8 MI and
ESP-16 MI
ESP-16 MI
The LINK LED is lit when the hub establishes a connection to the network.