Canon LV-7292M Instruction Manual

40

Select 

Digital zoom +. The On-Screen Menu 

disappears and 

D. zoom + appears. Press the OK 

button to expand the image size. Use the Point 

▲▼◄► buttons to pan the image. The Panning 

function can work only when the image is larger 

than the screen size. A projected image can be 

also expanded by pressing the D.ZOOM + or the 

OK button on the remote control unit. 

To exit the Digital zoom +/- mode, press any 

button except the D.ZOOM +/- buttons, OK and 

Point buttons.

Select 

Digital zoom -. The On-Screen Menu 

disappears and 

D. zoom - appears. Press the OK 

button to compress image size. 

The projected image can be also compressed by 

pressing the D.ZOOM 

- or the OK button on the 

remote control unit.  

To return to the previous screen size, select a 

screen size from the Screen Size Adjustment 

Menu or select an input source from the Input 

Source Selection Menu (see page 30) again, 

or adjust the screen size with the D.ZOOM +/- 

buttons.



  •  The minimum compression ratio is limited 

depending on the input signal, when the Keystone 

function is working or when the custom is selected 

for the screen size.

  • 

True and Digital zoom +/– are disabled and cannot 

be displayed when 

480i, 575i, 480p 575p, 720p, 

1035i or 1080i is selected in the PC System Menu 

(p.31).

  • 

Digital zoom +/- cannot be selected when True is 

selected.

  •  The minimum compression ratio is limited at Normal 

screen size.

  •

 Natural wide cannot be selected when 720p, 

1035i, 1080i or 1080p is selected on AV System 

Menu (p.43).

  •  When the 16:9 function is selected on Screen 

aspect menu, 

16:9 is not available in the PC and AV 

screen (pp.39, 49).

  •  When the 4:3 function is selected on Screen aspect 

menu, 

Natural wide is not available in the AV 

screen (p.49).

When this function is set to 

On, the picture will be 

top/ bottom and left/right reversed. This function is 

used to project the image from a ceiling-mounted 

projector.

When this function is set to 

On, the picture will be 

left/right reversed. This function is used to project 

the image from rear of the screen.

To reset the adjusted data, select Reset and press 

the OK button. A confirmation box appears and 

then select Yes. All adjustments will return to their 

previous figures.

This function is used to adjust keystone distortion 

of the  projected image. Use the Point ▲▼ 

buttons to choose the item you want to adjust.

    To correct keystone distortion, press the OK 

button.  

Keystone appears on the screen. Use the Point 

▲▼ buttons to correct keystone distortion 

(p.26).

    To store or reset the keystone correction, press 

the Point ► button.

Store ...........  Keep the keystone correction 

even when the AC power cord 

is plugged out or turned off the 

projector.

    

Reset ........... Release the keystone correction 

when the AC  power cord is 

plugged out.

This function is used to project the image to a 4:3 

or 16:9 projection screen.

Default (16:10) .... 16:10 is the aspect of the LCD 

panel. The original Screen Menu 

is available.

  16:9 ..... Set to a 16:9 projection screen.

  4:3 ..... Set to a 4:3 projection screen.

LV-RC06

Press the OK button.