Canon PowerShot Pro 90 IS User Guide

Page of 140
Preparing the Camera   
19
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time and
subsequently when the low battery icon (
) and Lb (
) message flash.
1
Turn the main dial to 
.
2
Slide the battery cover lock in the
direction of the arrow and lift to open
it.
3
Press the battery lock in the direction of
the arrow while inserting the battery
pack, then close the battery cover.
• Insert the battery pack until it locks into place.
4
Attach the power cord to the compact
power adapter and plug it into an
electrical outlet.
5
Connect the DC plug of the compact
power adapter to the camera’s DC IN
terminal.
• The indicator on the back panel will flash orange
while the battery pack is charging and change to
steady orange when it is approximately 90%
charged. If it is charged for approximately two
more hours, it will become fully charged and the
indicator will switch to green.
Connect to an
Electrical Outlet
...
Terminals
Battery
Lock
Orange
Indicator