Canon VB-R13 Manual
150
[Administrator Contact Information]
Enter contact information (e-mail address, etc.) for the administrator of the camera. Setting information can be referenced
Enter contact information (e-mail address, etc.) for the administrator of the camera. Setting information can be referenced
by the SNMP manager.
[Administration Function Name]
Enter the camera name used for administration. Setting information can be referenced by the SNMP manager.
If left blank, the camera model name will be used.
[Installation Location]
Enter information regarding the installation location of this camera. Setting information can be referenced by the SNMP
Enter information regarding the installation location of this camera. Setting information can be referenced by the SNMP
manager.
SNMP v1 and v2c Server
[Community Name]
If you select [Enable] for [Use SNMP v1 and v2c], enter the community name to use for SNMPv1 and v2c. The factory
If you select [Enable] for [Use SNMP v1 and v2c], enter the community name to use for SNMPv1 and v2c. The factory
default setting is blank.
SNMP v3 Server
[User Name]
If you selected [Enable] for [Use SNMP v3], set the user name to use with SNMP v3.
If you selected [Enable] for [Use SNMP v3], set the user name to use with SNMP v3.
[Security Level]
Select the security level to use for SNMP v3.
Select the security level to use for SNMP v3.
[Authentication Algorithm]
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], select the
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], select the
authentication algorithm.
[Authentication Password]
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], set the
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], set the
authentication password.
[Encryption Algorithm]
If you selected [Authentication and encryption] for [Security Level], select the encryption algorithm.
[Encryption Password]
If you selected [Authentication and encryption] for [Security Level], set the encryption password.
FTP Server
[Use FTP Server]
The settings for using an FTP server.
[User Name]
Set the name of the user to allow FTP connections for.
Set the name of the user to allow FTP connections for.
[Password]
Set the password of the user to allow FTP connections for.
Set the password of the user to allow FTP connections for.
Important
• Canon will assume no liability for any accident or damage resulting from use of FTP software.
• When changing the user name, make sure to also change the password.
• If you set the same user name as a user name used in the system, the message “User name is invalid.” is displayed. In this case, set
another user name.