Canon DP-V2410 Manual
66
Main specifications/Performance
Main specifications/Performance
Panel
Panel Type
IPS LCD panel
Screen Size
24 inch (61.1 cm)
Aspect Ratio
17:9
Resolution
4096x2160 (8.8 megapixels)
Active Display Area
Approximately 540.7 x 285.1 mm
Pixel Pitch
132 µm/193 ppi
Panel Driver
1024 gradations, 10-bit for each RGB color
Image quality
Brightness (Standard)
100 cd/m
2
View Angle (Up, Down, Left, Right)
89° (contrast ratio 10 : 1 or higher)
Surface Treatment
Anti-glare coating
General
Backlight Type
RGB LED, direct down type
Power
Rated Voltage: 100 – 240 V AC Rated Frequency: 50/60 Hz
24 V – 28 V DC Max. 8.9 A, XLR terminal
24 V – 28 V DC Max. 8.9 A, XLR terminal
Power consumption
At maximum load (including change in brightness through aging): Approximately 210 W
At factory shipment: Approximately 160 W
At factory shipment: Approximately 160 W
Environmental
Conditions
Conditions
Operating
Temperature and humidity: 0 – 40 °C (32 – 104 °F), 20 – 85 %RH (no condensation)
recommended: 15 – 30 °C (59 – 86 °F)
Pressure: 700 – 1060 hPa
Storage/
Transporting
Transporting
Temperature and humidity: -20 – 40 ˚C (-4 – 104 °F), 20 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 20 – 30 %RH (no condensation)
Pressure: 700 – 1060 hPa
Dimensions (width x height x depth)
Including stands: Approx. 594×399×187 mm (23.4×15.7×7.4 in.)
Main unit only, excluding protrusions: Approx. 594×378×106 mm (23.4×14.9×4.2 in.)
Main unit only, excluding protrusions: Approx. 594×378×106 mm (23.4×14.9×4.2 in.)
Weight
Approximately 12 kg (26.4 lb)
Mounting Hole Pitch
VESA standard 100 x 100 mm (3.9 x 3.9 in.)
Interface
Input
3G/HD/SD-SDI
4 (1 systems) BNC (75
Ω) receptacle terminal
3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: Compliant with SMPTE-259M
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: Compliant with SMPTE-259M
HDMI
1 (1 system) type A terminal Contents protection standard: HDCP 2.2
Output
3G/HD-SDI
4 (1 pass-thru systems)
Head phone
1 stereo mini jack, Supported impedance: 32
Ω to 64 Ω
Control
USB
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Compliant with Enhanced Host Controller Interface Specification for Universal Serial
Bus Revision 1.0
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Compliant with Enhanced Host Controller Interface Specification for Universal Serial
Bus Revision 1.0
LAN
1 RJ-45 terminal
Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX
Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX