Canon EOS 20D Instruction Manual

141

3

N

You can change the function assigned to <

0>. With C.Fn-01-1/2, you 

can press <

0>, then look at the LCD panel and set <5> directly.

Enables you to select the recording quality directly.

Enables you to select the processing parameter directly. “PA-P1, 
P2” stand for Parameter 1 and 2, and “PA-1” to “PA-3” stand for 
Set 1 to 3. “PA-B/W” is for monochrome.

Gives the same function as the <

M> button.

Gives the same function as the <

x> button.

Reduces noise in exposures 1 sec. or longer. After the picture is 
taken, the time required for noise-reduction processing will be the 
same as the exposure time. During the noise reduction 
processing, “buSY” will be displayed and shooting will not be 
possible.

Sets the flash sync speed to 1/250 sec. in the aperture-priority AE 
(Av) mode. (Against dark backgrounds such as the night sky, the 
subject’s background will look dark.)