Canon EOS 30D Instruction Manual

Page of 200
69
3
 White Balance Auto BracketingN
4
Take the picture.
X
When B/A bracketing has been set, the 
three images will be recorded onto the 
CF card in the following sequence: 
Standard WB, B (blue) bias, and A 
(amber) bias. If M/G bracketing has 
been set, the sequence will be 
Standard WB, M (magenta) bias, and 
G (green) bias.
 
The current drive mode (p.82) will be 
used for the shooting.
 
In step 3, set “BKT” to “±0” (“       ” to 
“   ” (1 point)).
 
White balance bracketing is also 
canceled automatically if you set the 
<4> switch to <2>, replace the 
battery, or replace the CF card.
Canceling White Balance Auto Bracketing
 
White balance bracketing will not work if the image-recording quality is 
set to RAW or RAW+JPEG.
 
With white balance bracketing, the maximum burst will be lower.
 
When white balance bracketing is set, the white balance icon will blink on 
the LCD panel and the remaining shots will decrease to about 1/3.
 
Since three images are recorded for one shot, the CF card will take 
longer to record the shot.
 
You can also set white balance correction and AEB shooting in 
combination with white balance bracketing. If you set AEB in 
combination with white balance bracketing, a total of nine images will be 
recorded for a single shot.
 
BKT” stands for bracketing.