Canon EOS-1Ds Instruction Manual
12
Quick Start Guide
Take the picture.
Press the shutter button fully to
take the picture. (
take the picture. (
→p.29)
Focus the subject.
Aim the Area AF over the subject
and press the shutter button
halfway to autofocus. (
and press the shutter button
halfway to autofocus. (
→p.59)
On the lens, set the
focus mode switch to
<
focus mode switch to
<
>.
(
→p.26)
Attach a lens.
Align the red dots on the lens
and camera and turn the lens as
shown by the arrow until it snaps
in place. (
and camera and turn the lens as
shown by the arrow until it snaps
in place. (
→p.26)
Load the battery.
Insert the battery into the battery
compartment and turn the
release handle as shown by the
arrow while pushing in the
battery. (
compartment and turn the
release handle as shown by the
arrow while pushing in the
battery. (
→p.23)
Recharge the battery.
Connect the battery to the battery charger
with the power cord.
The CHARGE lamp remains lit while the
battery is recharged. When the battery is
fully recharged (taking about 2 hours), the
CHARGE lamp will start blinking. (
with the power cord.
The CHARGE lamp remains lit while the
battery is recharged. When the battery is
fully recharged (taking about 2 hours), the
CHARGE lamp will start blinking. (
→p.22)
1
2
5
6
9
10
For detailed instructions, see the reference page indicated in parentheses.