Canon PowerShot SX10 IS User Guide
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
136
In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 108). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
set range to take three shots at the same interval as continuous
shooting (p. 108). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
To Cancel the AEB Mode:
Select
Select
in Step 1.
Auto Exposure Bracketing (AEB Mode)
Available Shooting Modes
1
Select AEB.
1. Press the
button.
2. Use the
or
button to select
and use the
or
button to
select
.
3. Press the DISP. button.
2
Adjust the compensation
range.
1. Adjust the compensation range with
the
or
button.
2. Press the
button.
• The compensation range can be set
as wide as 2 levels lower and 2 levels
higher than the standard exposure
value (the compensated exposure
value if exposure adjustment was performed) at the center point
in 1/3 increments. If exposure adjustment (p. 134) is already
done, setting can be done with the adjusted value as the center
point.
higher than the standard exposure
value (the compensated exposure
value if exposure adjustment was performed) at the center point
in 1/3 increments. If exposure adjustment (p. 134) is already
done, setting can be done with the adjusted value as the center
point.
The AEB mode is not available when shooting with the flash
on. Only one standard exposure image will be recorded.
on. Only one standard exposure image will be recorded.
Compensation range
Standard
exposure
exposure
COP
Y