Canon PowerShot SX420 IS Manual

15

 

●

After unplugging the battery charger, 

remove the battery pack by pushing it in 

(1) and up (2).

 

●

To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.

 

●

For battery chargers that use a power cord, do not attach 
the charger or cord to other objects. Doing so could result in 
malfunction or damage to the product.

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” (= 142).

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

(1)

(2)

 

●

Place the strap around your wrist.

 

●

When shooting, keep your arms close to 

your body and hold the camera securely 

to prevent it from moving. If you have 

raised the flash, do not rest your fingers 

on it.

Before use, charge the battery pack with the included charger. Be sure to 

charge the battery pack initially, because the camera is not sold with the 

battery pack charged.

 

●

After aligning the   marks on the battery 

pack and charger, insert the battery pack 

by pushing it in (1) and down (2).

 

●

CB-2LF: Flip out the plug (1) and plug the 

charger into a power outlet (2).

 

●

CB-2LFE: Plug the power cord into the 

charger, then plug the other end into a 

power outlet.

 

●

The charging lamp turns orange, and 

charging begins.

 

●

When charging is finished, the lamp turns 

green.

(1)

(2)

CB-2LFE

(2)

(1)

CB-2LF