Canon VB-R13VE Manual
102
Camera date and time settings.
Current Date and Time
The date and time set in the camera are shown.
Setting
Set the date and time setting method, time zone and daylight saving time for the camera.
[Setting Method]
Select the date and time setting method.
Select the date and time setting method.
The settings are configured as follows depending on the setting configured in [Setting Method].
[Set manually]
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format in <hour:minute:second> order.
[Synchronize with NTP server]
Select the setting method displayed in [Auto-Setting of NTP Server].
Select the setting method displayed in [Auto-Setting of NTP Server].
[Disable]
Enter the IP address or host name of the NTP server in [NTP Server].
Enter the IP address or host name of the NTP server in [NTP Server].
[Use DHCP]
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server. The
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server. The
acquired NTP server address is displayed in [NTP Server (DHCP)].
In order to set [Use DHCP], you must change [Network] > [IPv4] > [IPv4 Address Setting Method] to [Auto (DHCP)]
[Use DHCPv6]
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server.
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server.
The acquired NTP server address is displayed in [NTP Server (DHCPv6)].
In order to set [Use DHCPv6], you must change [Network] > [IPv6] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to
[Enable] (P. 97).
[Use DHCP/DHCPv6]
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server or
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server or
DHCPv6 server.
If the NTP server (address) can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server
address acquired from the DHCP server (IPv4) will be used.
[Synchronize with computer time]
The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],
The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],
[Setting Method] will change to [Set manually].
[Time Zone] is not automatically selected, so set it if necessary.
[Basic] > [Date and Time]
Setting the Date/Time
Setting the Date/Time
The following settings can be configured here.
• Current Date and Time
• Setting